Skip to content Skip to sidebar Skip to footer

LA78045 Datasheet Sanyo Download

 LA78045 Datasheet

LA78045 Datasheet Sanyo Download - The LA78045 is a Monolithic Linear IC  vertical deflection output IC for high image quality TV and CRT displays that supports the use of a bus control system signal-processing IC. 

The sawtooth waveform from the bus control system signal-processing IC can directly drive the deflection yoke (including the DC component). Color TV vertical deflection system adjustment functions can be controlled over a bus system by connecting the LA78045 to a Sanyo LA768X series or LA769XX series bus control system signal-processing IC.
LA78045 Datasheet Sanyo Download
LA78045 Datasheet TO-220 


Functions LA78045 IC

• Built-in pump-up circuit for low power dissipation.
• Vertical output circuit.
• Thermal protection circuit.


Specifications Maximum Ratings 

  • Pump-up block supply voltage  45 V
  • Output block supply voltage 92 V
  • Allowable power dissipation 9 W
  • Deflection output current max -1.5 to + 1.5 Ap-o
  • Thermal resistance 3 °C/W
  • Operating temperature Topr -20 to +85 °C
  • Storage temperature -40 to +150 °C




Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. 

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.